Although many people believe that we replaced bathtubs by other forms of water storage. This is not at all the case. This toilet has, and will continue to have, a significant influence, as well as a dedicated following. We offer best construction materials and products at Construction Companies in Sharjah.
As a consequence of this rationale, there are many different kinds of bathtubs available on the market today, making it possible to satisfy virtually any kind of requirement.
Although shower trays have been gaining popularity because to their ease of daily cleaning, there are still numerous advantages to owning a bathtub, particularly if you have more than one bathroom in your home. One of these advantages is the ability to soak in a warm bath.
In this article, we will tell you a little bit about its history, the different types of bathtubs that are available today, how they work, the reasons why you can have one. We use the materials to manufacture them, and other pertinent information that will clear up any doubts that you may have.
A Brief Overview of the History of Bathtubs
The first known example of a bathtub discovered in Egypt around 1700 BC; however, its creators did not establish the identity.
It is located at the Palace of Knossos on the island of Crete.
Because of this, it is one of the oldest hygienic materials that is still in use today. They primarily used for two purposes: purifying the body and the spirit.
According to historians, people during that historical period believed that it not only strengthened the body but also treated ailments. Something that makes sense when we consider the fact that improper hygiene can lead to infections and other major health concerns.
There is other research that point to the fact that people used baths for magical purposes back in the ancient times.
In spite of this, there is abundant proof, in addition to what establish, that this component has been around for a very long time.
We use a wide variety of materials, including bronze, marble, and even onyx, depending on the project at hand.
The Greeks and Romans made extensive use of them, but in the centuries that followed, very few homes had bathtubs in them due to either religious restrictions or economic constraints. The Greeks and Romans used them extensively.
Types Of Bathtubs
Although we all know the most classic shapes, there are all kinds of bathtubs and designs.
From the most widespread such as the built-in ones, to the intelligent and technological ones.
On the other hand, the different types we often classify depending on their shape or material.
First it is essential to know the different formats so to speak, and then we will move on to shapes and materials.
(We offer best product and you can rafter to our services for Construction Companies in Sharjah. )
Built – in bathtubs or also called built-in bathtubs, are those that place on a work structure with frames.
Both the legs (in the case of having them) and hide the outer base and the skirts or coverings which we usually sell separately.
Built – in bathtubs are one of the most widespread in homes and their placement requires masonry.
They usually have a rectangular shape.
Freestanding bathtubs, on the other hand, are those that we do not build into walls or corners.
They can place to form a small island in the middle of the bathroom, but it is common to also place them near the walls and integrate them into a shower. This optimizes resources and space.
They are usually bathtubs with an elegant design and aimed at a public that likes to invest in interior design.
There are some models ready to install outdoors.
On the other hand, they can increase the value of the home as it is a product of a certain exclusivity.
We’ve all imagined relaxing in hot tubs on more than one occasion. Even surely more than one has been able to enjoy a bath of this type.
We always see Hydromassage bathtubs as a relaxing and experiential element.
This type of bathtub includes hoses, adjustable nozzles, and jets through which jets of water come out and expel air, creating a powerful movement of water that massages the body.
Widely used in therapeutic and relaxation centers, they are desired by all thanks to the physical benefits they provide to the people who enjoy them.
Angular bathtubs are those that we place in a corner of the bathroom, so they always have a 90º angle in one of their parts.
Normally, they have dimensions greater than the standard.
Although we often include them within the built-in ones, for us it represents a totally different type.
Perhaps they are the least widespread, at least.
As you have seen, these are the largest groups of existing bathtubs.
On the other hand, it must be taken into account that some groups that we can always mix with others, that is, there are angular hydromassage bathtubs, built-in hydromassage bathtubs, etc.
Different materials with which we can make a bathtub.
Regardless of whether a bathtub is built-in, angular, freestanding or hydromassage, it can make of different materials.
Depending on its use and where it will install, we may be interested in one or the other.
Next, we indicate the most common.
(We offer best product and for any questions you can refer to us at Construction Companies in Sharjah. )
We can make Metal bathtubs of enameled steel or cast iron.
Enameling gives impact and scratch resistant properties and provides a smooth, soft, and pleasant finish.
The cast iron ones maintain heat quite well, but they are heavy, so you have to take into account if the place where you want to install it can support that load.
Compared to the enameled steel ones, they are much lighter, but they do not retain the temperature of the water as much.
On the other hand, these bathtubs are not available in various shapes and types because they are more complicated to manufacture.
On many occasions, usually cover them with porcelain.
(We offer best product and for any questions you can get to us at Construction Companies in Sharjah. )
Currently, most commonly make bathtubs of synthetic materials that provide great functionalities.
They are light products, easy to install and even to drill in the event of having to add taps.
Although they may be less resistant than metal ones, they admit a large number of shapes and even customizations.
Within the synthetic materials, we find:
This material is light and quiet. It retains heat very well.
On the other hand, it is somewhat delicate, so care must take with corrosive cleaning products or with scratches and/or bumps.
Fiberglass bathtubs are strong, lightweight, and affordable. A great option for those looking for quality for a good price.
On the contrary, they may need some maintenance due to their slightly porous texture.
Resin bathtubs provide a soft touch, are resistant, light, and quite affordable.
Natural stone bathtubs are much larger. Its resistance is enormous and the maintenance is quite low.
They can make to measure, but they are much more expensive and heavier, so they are not suitable for floors.
However, they are elegant and very special. A bathtub that can last a lifetime and that there will not be an equal model.
They can make of marble, limestone, etc.
They are perfect for large and outdoor areas.
Shapes Of Bathtubs
There are various shapes and sizes of bathtubs today. However, there are a number of very widespread forms.
The most common are:
- Rectangular Bathtub.
- Oval Bathtub.
- Corner Bathtub.
- Round Bathtub.
- Oval Bathtub
From the smallest for small spaces, to the largest to accommodate more than one person.
It has become clear that comparisons are odious and equating a bathtub with a shower tray is not possible.
The shower is for everyday life and makes life much easier. However, the benefits provided by a bathtub are not far behind.
Good experience, relax, useful with the smallest of the house and design.
If you have the possibility of having both options, that is, a shower in one bathroom and a bathtub in another, it is ideal. On the contrary, you will have to weigh everything indicated above.
If You Have Any Questions Contact us At Deira Mall.